Here’s a 1993 Williams STTNG in for repair and an LED conversion. LEDs really make this game pop visually. I installed an LED kit from Coin Taker. Common failures for this game are the ball trough opto boards and many of the other optos used in the subway ramp under the playfield. The cannons on the sling shots typically have broken wires as well. The left one gets hammered the most because it is used at the start of every Borg mutliball. It’s best to completely rewire both cannons.
-
- Here’s the lit up translite with new LEDs.
-
- Full LED kit installed.
-
- Full LED kit installed.
-
- Brand new wire loom on this sign.
-
- This is probably the worst looking cannon wiring I’ve ever seen. It has many hacks over the years. This must be redone. Time to do it right!
-
- Here it is with the new wire loom. MUCH better!
-
- The optos on these two subway boards were replaced.
-
- Coin Taker STTNG kit.
-
- LEDs installed on the back board.
-
- LEDs installed on an under playfield PCB.
-
- LEDs installed on an under playfield PCB.